|
Jumboclean-Special
finds a
variety uses in the machine shop. As a
coolant, 1 part Jumboclean-Special
to 1 part water soluble oil added to
the sump in the same
propotion as
before, eliminates oil curds and
congealing.
The Jumboclean-Special
acts as a coolant and keeps water
soluble oil so evenly dispersed that
results are immediately apparent.
Additionally, because Jumboclean-Special
is also classified as a cleaner, it can
virtually eliminate costly cleaning
operations. Because of this built-in
cleaning action, it keeps the sumps and
pressures lines clean, reducing
maintenance cost in sump cleaning.
Research has shown that
because of bacteria growth in cutting
fluids, corrosion is actually started on
parts while they are being formed on the
machines; additionally, bacteria reduces
the life span of cutting tools by as
much as 40%. Since Jumboclean-Special
is bacteriostatic in nature, it greatly
reduces the occurence of bacteria,
consequently solving many of the
problems associated wit it.
As a Cleaner for Sumps:
Use 1 part Jumboclean-Special to
2 to 3 parts water and circulate for 30
minutes. The same solution may be used
for washing down the exterior of the
machine, while the sump is being
cleaned. This mixture will destroy all
existing bacteria, and because of its
colloidal action will remove
all metal filings that clog up pressure
lines and pumps. When operation is
completed, drain sump and rinse to
complete the removal of metal filings.
Jumboclean-Special
may be used as a floor cleaner for
machine shops: Use 1 part Jumboclean-Special
to 4 parts water and apply to floor by
any convenient means; let stand 15
minutes; where oil and greases are heavy
crusts, agitate with a stiff bristle
broom; check a small spot to be sure all
dirt, grease, oils
etc. are in solution, then rinse, mop or
squeegee off.
The use of Jumboclean-Special
in machine shop greatly reduces the
occurence of dermatitis because of
bacteria control.
|
