 |
Use
2 to 3 pints for each 4 pounds of powder
normally used, or 0,8 oz. per
 gallon at the nozzle of the steam gun
are sufficient. The concentration may be
made as high as 1 part of Jumboclean-Special
to 1 part of water in the solution tank
because there are no powders in
Jumboclean-Special to fall out on
the bottom of the tank, to clog up small
orifices,
and tubing or create scale in steam
oils. The highly concentrated solution
may then be controlled by the metering
valve. By using this method,
concentration may be varied to fit any
job by a single turn of the metering
valve. Jumboclean-Special is safe
on any surface that will tolerate steam.
Because of its
colloidal
action, Jumboclean-Special
keeps scale forming in steam coils. |
